CentOS - yum install - Échec: Protégé Multilib versions: problèmes trouvés libselinux

J'ai CentOS 6.5

Je suis en train de intsall git via yum, mais d'avoir une erreur lors de l'installation des pré-requis des paquets. Je n'ai pas besoin, mais il ne fait pas de mal sudo avec la racine.

Message d'erreur:

--> Finished Dependency Resolution
Error:  Multilib version problems found. This often means that the root
       cause is something else and multilib version checking is just
       pointing out that there is a problem. Eg.:

         1. You have an upgrade for libselinux which is missing some
            dependency that another package requires. Yum is trying to
            solve this by installing an older version of libselinux of the
            different architecture. If you exclude the bad architecture
            yum will tell you what the root cause is (which package
            requires what). You can try redoing the upgrade with
            --exclude libselinux.otherarch ... this should give you an error
            message showing the root cause of the problem.

         2. You have multiple architectures of libselinux installed, but
            yum can only see an upgrade for one of those arcitectures.
            If you don't want/need both architectures anymore then you
            can remove the one with the missing update and everything
            will work.

         3. You have duplicate versions of libselinux installed already.
            You can use "yum check" to get yum show these errors.

       ...you can also use --setopt=protected_multilib=false to remove
       this checking, however this is almost never the correct thing to
       do as something else is very likely to go wrong (often causing
       much more problems).

       Protected multilib versions: libselinux-2.0.94-5.3.el6_4.1.i686 != libselinux-2.0.94-5.8.el6.x86_64
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

Complète du journal:

[root@server01 ~]# sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package expat-devel.x86_64 0:2.0.1-11.el6_2 will be installed
---> Package gettext-devel.x86_64 0:0.17-16.el6 will be installed
--> Processing Dependency: gettext-libs = 0.17-16.el6 for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: gettext = 0.17-16.el6 for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextsrc-0.17.so()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextpo.so.0()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgettextlib-0.17.so()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libgcj_bc.so.1()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
--> Processing Dependency: libasprintf.so.0()(64bit) for package: gettext-devel-0.17-16.el6.x86_64
---> Package libcurl-devel.x86_64 0:7.19.7-37.el6_4 will be installed
--> Processing Dependency: libidn-devel for package: libcurl-devel-7.19.7-37.el6_4.x86_64
--> Processing Dependency: automake for package: libcurl-devel-7.19.7-37.el6_4.x86_64
---> Package openssl-devel.x86_64 0:1.0.1e-30.el6 will be installed
--> Processing Dependency: openssl = 1.0.1e-30.el6 for package: openssl-devel-1.0.1e-30.el6.x86_64
--> Processing Dependency: krb5-devel for package: openssl-devel-1.0.1e-30.el6.x86_64
---> Package perl-ExtUtils-MakeMaker.x86_64 0:6.55-136.el6 will be installed
--> Processing Dependency: perl-devel for package: perl-ExtUtils-MakeMaker-6.55-136.el6.x86_64
--> Processing Dependency: perl(Test::Harness) for package: perl-ExtUtils-MakeMaker-6.55-136.el6.x86_64
---> Package zlib-devel.x86_64 0:1.2.3-29.el6 will be installed
--> Running transaction check
---> Package automake.noarch 0:1.11.1-4.el6 will be installed
--> Processing Dependency: autoconf >= 2.62 for package: automake-1.11.1-4.el6.noarch
---> Package gettext.x86_64 0:0.17-16.el6 will be installed
--> Processing Dependency: cvs for package: gettext-0.17-16.el6.x86_64
---> Package gettext-libs.x86_64 0:0.17-16.el6 will be installed
---> Package krb5-devel.x86_64 0:1.10.3-37.el6_6 will be installed
--> Processing Dependency: krb5-libs = 1.10.3-37.el6_6 for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.10.3-37.el6_6.x86_64
---> Package libgcj.x86_64 0:4.4.7-4.el6 will be installed
--> Processing Dependency: zip >= 2.1 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libart_lgpl >= 2.1.0 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: gtk2 >= 2.4.0 for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libasound.so.2(ALSA_0.9)(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpangoft2-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpangocairo-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libpango-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgtk-x11-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgdk_pixbuf-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libgdk-x11-2.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libfreetype.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libfontconfig.so.1()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libcairo.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libatk-1.0.so.0()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libasound.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXtst.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXrender.so.1()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libXrandr.so.2()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libSM.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
--> Processing Dependency: libICE.so.6()(64bit) for package: libgcj-4.4.7-4.el6.x86_64
---> Package libidn-devel.x86_64 0:1.18-2.el6 will be installed
---> Package openssl.x86_64 0:1.0.1e-15.el6 will be updated
---> Package openssl.x86_64 0:1.0.1e-30.el6 will be an update
---> Package perl-Test-Harness.x86_64 0:3.17-136.el6 will be installed
---> Package perl-devel.x86_64 4:5.10.1-136.el6 will be installed
--> Processing Dependency: perl(ExtUtils::ParseXS) for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Processing Dependency: gdbm-devel for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Processing Dependency: db4-devel for package: 4:perl-devel-5.10.1-136.el6.x86_64
--> Running transaction check
---> Package alsa-lib.x86_64 0:1.0.22-3.el6 will be installed
---> Package atk.x86_64 0:1.30.0-1.el6 will be installed
---> Package autoconf.noarch 0:2.63-5.1.el6 will be installed
---> Package cairo.x86_64 0:1.8.8-3.1.el6 will be installed
--> Processing Dependency: libpng12.so.0(PNG12_0)(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libpng12.so.0()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libpixman-1.so.0()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
--> Processing Dependency: libX11.so.6()(64bit) for package: cairo-1.8.8-3.1.el6.x86_64
---> Package cvs.x86_64 0:1.11.23-16.el6 will be installed
---> Package db4-devel.x86_64 0:4.7.25-18.el6_4 will be installed
--> Processing Dependency: db4-cxx = 4.7.25-18.el6_4 for package: db4-devel-4.7.25-18.el6_4.x86_64
--> Processing Dependency: libdb_cxx-4.7.so()(64bit) for package: db4-devel-4.7.25-18.el6_4.x86_64
---> Package fontconfig.x86_64 0:2.8.0-3.el6 will be installed
---> Package freetype.x86_64 0:2.3.11-14.el6_3.1 will be installed
---> Package gdbm-devel.x86_64 0:1.8.0-36.el6 will be installed
---> Package gtk2.x86_64 0:2.20.1-4.el6 will be installed
--> Processing Dependency: libtiff >= 3.6.1 for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjpeg.so.62(LIBJPEG_6.2)(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: hicolor-icon-theme for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libtiff.so.3()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjpeg.so.62()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libjasper.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libcups.so.2()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXinerama.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXi.so.6()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXfixes.so.3()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXext.so.6()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXdamage.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXcursor.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
--> Processing Dependency: libXcomposite.so.1()(64bit) for package: gtk2-2.20.1-4.el6.x86_64
---> Package keyutils-libs-devel.x86_64 0:1.4-4.el6 will be installed
---> Package krb5-libs.x86_64 0:1.10.3-10.el6_4.6 will be updated
---> Package krb5-libs.x86_64 0:1.10.3-37.el6_6 will be an update
---> Package libICE.x86_64 0:1.0.6-1.el6 will be installed
---> Package libSM.x86_64 0:1.2.1-2.el6 will be installed
---> Package libXrandr.x86_64 0:1.4.0-1.el6 will be installed
---> Package libXrender.x86_64 0:0.9.7-2.el6 will be installed
---> Package libXtst.x86_64 0:1.2.1-2.el6 will be installed
---> Package libart_lgpl.x86_64 0:2.3.20-5.1.el6 will be installed
---> Package libcom_err-devel.x86_64 0:1.41.12-18.el6 will be installed
---> Package libselinux-devel.x86_64 0:2.0.94-5.3.el6_4.1 will be installed
--> Processing Dependency: libselinux = 2.0.94-5.3.el6_4.1 for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
--> Processing Dependency: libsepol-devel >= 2.0.32-1 for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.0.94-5.3.el6_4.1.x86_64
---> Package pango.x86_64 0:1.28.1-7.el6_3 will be installed
--> Processing Dependency: libthai >= 0.1.9 for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libthai.so.0(LIBTHAI_0.1)(64bit) for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libthai.so.0()(64bit) for package: pango-1.28.1-7.el6_3.x86_64
--> Processing Dependency: libXft.so.2()(64bit) for package: pango-1.28.1-7.el6_3.x86_64
---> Package perl-ExtUtils-ParseXS.x86_64 1:2.2003.0-136.el6 will be installed
---> Package zip.x86_64 0:3.0-1.el6 will be installed
--> Running transaction check
---> Package cups-libs.x86_64 1:1.4.2-50.el6_4.5 will be installed
--> Processing Dependency: libgnutls.so.26(GNUTLS_1_4)(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libgnutls.so.26()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libavahi-common.so.3()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
--> Processing Dependency: libavahi-client.so.3()(64bit) for package: 1:cups-libs-1.4.2-50.el6_4.5.x86_64
---> Package db4-cxx.x86_64 0:4.7.25-18.el6_4 will be installed
---> Package hicolor-icon-theme.noarch 0:0.11-1.1.el6 will be installed
---> Package jasper-libs.x86_64 0:1.900.1-15.el6_1.1 will be installed
---> Package libX11.x86_64 0:1.5.0-4.el6 will be installed
--> Processing Dependency: libX11-common = 1.5.0-4.el6 for package: libX11-1.5.0-4.el6.x86_64
--> Processing Dependency: libxcb.so.1()(64bit) for package: libX11-1.5.0-4.el6.x86_64
---> Package libXcomposite.x86_64 0:0.4.3-4.el6 will be installed
---> Package libXcursor.x86_64 0:1.1.13-6.20130524git8f677eaea.el6 will be installed
---> Package libXdamage.x86_64 0:1.1.3-4.el6 will be installed
---> Package libXext.x86_64 0:1.3.1-2.el6 will be installed
---> Package libXfixes.x86_64 0:5.0-3.el6 will be installed
---> Package libXft.x86_64 0:2.3.1-2.el6 will be installed
---> Package libXi.x86_64 0:1.6.1-3.el6 will be installed
---> Package libXinerama.x86_64 0:1.1.2-2.el6 will be installed
---> Package libjpeg-turbo.x86_64 0:1.2.1-1.el6 will be installed
---> Package libpng.x86_64 2:1.2.49-1.el6_2 will be installed
---> Package libselinux.i686 0:2.0.94-5.3.el6_4.1 will be installed
--> Processing Dependency: libdl.so.2(GLIBC_2.1) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libdl.so.2(GLIBC_2.0) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libdl.so.2 for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.8) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: ld-linux.so.2(GLIBC_2.3) for package: libselinux-2.0.94-5.3.el6_4.1.i686
--> Processing Dependency: ld-linux.so.2 for package: libselinux-2.0.94-5.3.el6_4.1.i686
---> Package libsepol-devel.x86_64 0:2.0.41-4.el6 will be installed
---> Package libthai.x86_64 0:0.1.12-3.el6 will be installed
---> Package libtiff.x86_64 0:3.9.4-9.el6_3 will be installed
---> Package pixman.x86_64 0:0.26.2-5.el6_4 will be installed
--> Running transaction check
---> Package avahi-libs.x86_64 0:0.6.25-12.el6 will be installed
---> Package glibc.x86_64 0:2.12-1.132.el6 will be updated
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-devel-2.12-1.132.el6.x86_64
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-headers-2.12-1.132.el6.x86_64
--> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-common-2.12-1.132.el6.x86_64
---> Package glibc.i686 0:2.12-1.149.el6_6.5 will be installed
--> Processing Dependency: libfreebl3.so(NSSRAWHASH_3.12.3) for package: glibc-2.12-1.149.el6_6.5.i686
--> Processing Dependency: libfreebl3.so for package: glibc-2.12-1.149.el6_6.5.i686
---> Package glibc.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package gnutls.x86_64 0:2.8.5-10.el6_4.2 will be installed
---> Package libX11-common.noarch 0:1.5.0-4.el6 will be installed
---> Package libxcb.x86_64 0:1.8.1-1.el6 will be installed
--> Processing Dependency: libXau.so.6()(64bit) for package: libxcb-1.8.1-1.el6.x86_64
--> Running transaction check
---> Package glibc-common.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-common.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package glibc-devel.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-devel.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated
---> Package glibc-headers.x86_64 0:2.12-1.149.el6_6.5 will be an update
---> Package libXau.x86_64 0:1.0.6-4.el6 will be installed
---> Package nss-softokn-freebl.i686 0:3.14.3-9.el6 will be installed
--> Finished Dependency Resolution
Error:  Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is a problem. Eg.:
1. You have an upgrade for libselinux which is missing some
dependency that another package requires. Yum is trying to
solve this by installing an older version of libselinux of the
different architecture. If you exclude the bad architecture
yum will tell you what the root cause is (which package
requires what). You can try redoing the upgrade with
--exclude libselinux.otherarch ... this should give you an error
message showing the root cause of the problem.
2. You have multiple architectures of libselinux installed, but
yum can only see an upgrade for one of those arcitectures.
If you don't want/need both architectures anymore then you
can remove the one with the missing update and everything
will work.
3. You have duplicate versions of libselinux installed already.
You can use "yum check" to get yum show these errors.
...you can also use --setopt=protected_multilib=false to remove
this checking, however this is almost never the correct thing to
do as something else is very likely to go wrong (often causing
much more problems).
Protected multilib versions: libselinux-2.0.94-5.3.el6_4.1.i686 != libselinux-2.0.94-5.8.el6.x86_64
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
[root@server01 ~]#

yum repolist me montre:

[root@server01 ~]# yum repolist
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
repo id                                                                          repo name                                                                                    status
puppetlabs-deps                                                                  Puppet Labs Dependencies El 6 - x86_64                                                          77
puppetlabs-products                                                              Puppet Labs Products El 6 - x86_64                                                             538
release.update                                                                   6.6.5                                                                                        6,367
supplemental.release                                                             supplemental.6                                                                                  84
supplemental.release.update                                                      supplemental.6.6.5                                                                               1
repolist: 7,067
[root@server01 ~]#

Essayé de lancer les commandes suivantes, mais c'est toujours une erreur (il fait un peu du téléchargement et de résoudre les dépendances mais finalement échoue avec le nouveau message d'erreur).
yum-de compléter la transaction; yum-distro-sync; yum clean all; yum update

Transaction Check Error:
file /usr/bin/extlookup2hiera from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera/backend/puppet_backend.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera/scope.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/hiera_puppet.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_array.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_hash.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
file /usr/lib/ruby/site_ruby/1.8/puppet/parser/functions/hiera_include.rb from install of puppet-3.8.4-1.el6.noarch conflicts with file from package hiera-puppet-1.0.0-1.el6.noarch
Error Summary
-------------

J'ai vu ce post pour installer un paquet supplémentaire repo pour CentOS 6 (x86_64), mais cela n'a pas aidé. Avec l'aide de ce, maintenant je vais avoir un 3ème erreur.

# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# rpm -ivh epel-release-6-8.noarch.rpm
warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
Preparing...                ########################################### [100%]
1:epel-release           ########################################### [100%]
[root@server01 yum.repos.d]#

Maintenant yum repolist montre une ligne supplémentaire (pour les paquets supplémentaires - CentOS):

epel                                                                         Extra Packages for Enterprise Linux 6 - x86_64                                                   11,838

Encore, en cours d'exécution:
sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker est encore de me donner le même message d'erreur (que j'ai eu d'abord comme mentionné en haut).

/etc/yum.les pensions de titres.d contient --
# pwd; ls-l

/etc/yum.repos.d
total 32
-rw-r--r--  1 root root 14540 Nov  5  2012 epel-release-6-8.noarch.rpm
-rw-r--r--  1 root root   957 Nov  4  2012 epel.repo
-rw-r--r--  1 root root  1056 Nov  4  2012 epel-testing.repo
-rw-r--r--. 1 root root  1250 Jan 22  2014 puppetlabs.repo
-rw-r--r--. 1 root root   406 Dec  8 10:48 mycompany.redhat.repo

Puppetlabs.repo semble redondant pour ce poste, les 2 premiers .pensions de fichiers sont installés ici après que j'ai téléchargé + installé le paquet supplémentaire des pensions de rpm (comme indiqué dans le post/lien ci-dessus) et le contenu en mycompany.redhat.pensions de titres sont:

[release.update]
name=$releasever.$YUM0
baseurl=http://manager/yum/$basearch/$releasever/$YUM0/Server
enabled=1
gpgcheck=0
[supplemental.release]
name=supplemental.$releasever
baseurl=http://manager/yum/$basearch/supplemental/$releasever
enabled=1
gpgcheck=0
[supplemental.release.update]
name=supplemental.$releasever.$YUM0
baseurl=http://manager/yum/$basearch/supplemental/$YUM0
enabled=1
gpgcheck=0

InformationsquelleAutor Arun Sangal | 2015-12-28

4

C'est probablement parce que les versions entre les architectures ne correspondent pas. Voir comment la version 32 bits, c'est d'essayer de mettre à jour n'est pas le même que le 64 bits un.

Essayez de mettre à jour l'installation de la version 64 bits en premier?
```
$sudo yum update libselinux.x86_64
$sudo yum update libselinux.i686
```
Si cela ne fonctionne toujours pas, assurez-vous de n'avoir qu'une seule version du logiciel installé et de supprimer toutes les anciennes versions.
```
$sudo yum erase libselinux-2.0.94-5.8.el6.x86_64
```
InformationsquelleAutor Pawan Kumar
3

l'approche qui a fonctionné pour moi:
1. sudo package-cleanup --dupes
2. sudo package-cleanup --cleandupes
3. sudo package-cleanup --cleandupes --removenewestdupes
4. sudo yum update
si le yum update échoue encore - continuer comme suit:
1. vérifier les versions installées de la délinquance de la bibliothèque avec yum recherche
  par exemple: si le problème est avec libselinux
  
  sudo liste yum --showduplicates libselinux
2. dans les résultats que vous verrez probablement des versions de la bibliothèque se terminant avec x86_64 ou i686
  par exemple :
  libselinux.i686
  libselinux.x86_64
maintenant - nous avons besoin de savoir qui de l'un de ces afin de se débarrasser de, de sorte que
nous gérons:

uname-a

si l'on voit dans les résultats (sur le 3e paramètre à partir de la gauche): quelque chose comme: 4.18.16-x86_64-monserveur puis nous sommes garder la bibliothèque avec le suffixe x86_64 et de se débarrasser de la bibliothèque avec
suffixe i686

si nous voyons i686 sur le 3e paramètre puis nous sommes se débarrasser de x86_64 et de garder i686

ainsi, par exemple, si j'ai 4.18.16-x86_64-monserveur, je vais me présenter:

sudo yum effacer libselinux.i686

une fois cela fait, nous pouvons exécuter yum update ou yum réinstaller sur la bibliothèque que nous voulons pour la mise à niveau (libselinux)

InformationsquelleAutor Dror

J'ai créé un fichier /etc/yum.les pensions de titres.d/CentOS-Base.pensions de ou certains nom (je l'ai fait un peu générique, de sorte qu'il peut travailler pour n'importe quel 6.x ou 7 version). Il a travaillé sur 6.5. Si vous trouvez un problème à l'aide de ce fichier avec CentOS 7.x, puis tous vous avez besoin est la bonne CentOS-Base.repo officiel .pensions de fichier pour CentOS 7.x ou X. Y version) et les enjeux à venir dans le post sera résolu.

Par ex:
Contenu de /etc/yum.les pensions de titres.d/CentOS-Base-Personnalisé.pensions de
(PS: j'ai nommé personnalisé au lieu d'utiliser codé en dur de la version 6, j'ai utilisé $releasever variable dans nom, mirrorlist, baseurl, gpgkey champs à l'intérieur de l' .pensions de fichier.

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-$releasever

Ran: sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker et cela a fonctionné sans erreur.

Re-couru la même et la sortie est venu comme prévu.

[root@server01 yum.repos.d]# sudo yum -y install curl-devel expat-devel gettext-devel openssl-devel zlib-devel gcc perl-ExtUtils-MakeMaker
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.symnds.com
* epel: mirror.cogentco.com
* extras: centos.mirror.nac.net
* updates: mirror.ash.fastserv.com
Setting up Install Process
Package libcurl-devel-7.19.7-46.el6.x86_64 already installed and latest version
Package expat-devel-2.0.1-11.el6_2.x86_64 already installed and latest version
Package gettext-devel-0.17-18.el6.x86_64 already installed and latest version
Package openssl-devel-1.0.1e-42.el6_7.1.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package gcc-4.4.7-16.el6.x86_64 already installed and latest version
Package perl-ExtUtils-MakeMaker-6.55-141.el6_7.1.x86_64 already installed and latest version
Nothing to do
[root@server01 yum.repos.d]#

À tous j'ai besoin maintenant est d'utiliser un modèle de module dans Ansible (et de mettre ce fichier dans /etc/yum.les pensions de titres.d dossier sur la machine cible) et une fois fait, les pré-requis seront installés sans erreurs et ansible va installer le désiré (défini par l'utilisateur GIT version) que j'ai besoin.

InformationsquelleAutor Arun Sangal

0

J'ai aussi été confrontée au même problème sur RHEL 7.7 et j'ai fixé comme ci-dessous:

Après l'exécution de #yum update commande j'ai été faire d'erreur ci-dessous:

Mesures prises:
```
#yum install yum-utils
#yum update kernel*
#package-cleanup --dupes
#package-cleanup --problems
```
Puis j'ai mis à jour ce les paquets un par un.
```
#yum update audit
#yum update Network*
#yum update initscripts
#yum remove grub2-tools-minimal
#yum update grub2*
```
et finalement s'
#yum update

il a travaillé vraiment bien.
- pouvez-vous faire un effort pour améliorer votre mise en forme ici? le code doit être en retrait par 4 espaces pour le code de balisage
InformationsquelleAutor Santosh Garole

Vous devez vous connecter pour publier un commentaire.