Comment écrire sur le port série en python qui ttyUSB0 sera interprété commandes?
J'ai raspberry PI B+ avec connecté Telegesis module ZigBee(ETRX3 clés USB) via le port USB. À l'aide de commandes:
debian:~# stty -F /dev/ttyUSB0 -raw ispeed 19200 ospeed 19200
debian:~# cat < /dev/ttyUSB0 &
debian:~# echo "ATI" > /dev/ttyUSB0
le module ZigBee exécuté ATI commande et je peux voir le bon de sortie:
Telegesis ETRX357
R308C
OK
La même chose que je veux faire avec un script python. J'ai été écrites script python avec le code:
#!/usr/bin/env python
# based on tutorials:
# http://www.roman10.net/serial-port-communication-in-python/
# http://www.brettdangerfield.com/post/raspberrypi_tempature_monitor_project/
import serial, time
SERIALPORT = "/dev/ttyUSB0"
BAUDRATE = 19200
ser = serial.Serial(SERIALPORT, BAUDRATE)
ser.bytesize = serial.EIGHTBITS #number of bits per bytes
ser.parity = serial.PARITY_NONE #set parity check: no parity
ser.stopbits = serial.STOPBITS_ONE #number of stop bits
#ser.timeout = None #block read
#ser.timeout = 0 #non-block read
ser.timeout = 2 #timeout block read
ser.xonxoff = False #disable software flow control
ser.rtscts = False #disable hardware (RTS/CTS) flow control
ser.dsrdtr = False #disable hardware (DSR/DTR) flow control
ser.writeTimeout = 0 #timeout for write
print 'Starting Up Serial Monitor'
try:
ser.open()
except Exception, e:
print "error open serial port: " + str(e)
exit()
if ser.isOpen():
try:
ser.flushInput() #flush input buffer, discarding all its contents
ser.flushOutput()#flush output buffer, aborting current output
ser.write("ATI")
print("write data: ATI")
time.sleep(0.5)
numberOfLine = 0
while True:
response = ser.readline()
print("read data: " + response)
numberOfLine = numberOfLine + 1
if (numberOfLine >= 5):
break
ser.close()
except Exception, e:
print "error communicating...: " + str(e)
else:
print "cannot open serial port "
et obtenir les résultats que sur l'écran
ATI
mais je tiens à commande exécuter par module ZigBee, comme dans les commandes shell. Ce que je fais mal?
OriginalL'auteur granan | 2014-09-04
Vous devez vous connecter pour publier un commentaire.
vous devez ajouter une ligne à votre write()
ser.write("ATI\r\n")
vous devez modifier le délai d'attente pour:
ser.timeout = None
Sinon readline() sera de retour après 2 secondes, même si rien n'a été lu.
OriginalL'auteur Derek Baum